AviPLAN Turn Pro 2.0.2 Software Update

This software update is for AviPLAN Turn Pro 2 users ONLY. Please ensure that you have an installed version of AviPLAN Turn Pro 2 before you attempt to download the update.

This update includes the following:

Do I need to update?
We strongly recommend that you apply this update if you currently have AviPLAN Turn Pro 2.0.0 or 2.0.1 installed. You can check your AviPLAN Turn Pro version number using the following instructions:

  1. Start AviPLAN Turn Pro on a workstation
  2. Click on About AviPLAN Turn Pro

To begin the update process, please fill out the following form to download the update and follow the installation instructions below.

Download

AviPLAN Turn Pro 2.0.2 Software Update

AviPLAN Turn Pro 2.0.2 Software Update

You can download the update at the following link:

Installation Instructions

Standalone Update

  1. Download the AVPTP202_73.zip file to the workstation where AviPLAN Turn Pro 2 has been installed.
  2. Unzip the AVPTP202_73.zip
  3. Login to the workstation with an account that allows administrator permissions.
  4. Run the Setup.exe file.
  5. Select Set up a Standalone License option and click on Install.
  6. Follow the remaining onscreen prompts to complete the installation process.
  7. Load a session of AviPLAN Turn Pro in AutoCAD®, MicroStation® or BricsCAD®.
  8. Click About AviPLAN Turn Pro from the menu, ribbon or toolbar.
  9. Click the License Info button.
  10. Verify that the installed version is now AviPLAN Turn Pro 2.0.2.73.
  11. Save the ZIP file to an archive location on the network or burn the file to a CDROM/USB drive to be used in the event that you need to re-install or perform a new install of AviPLAN Turn Pro 2.0.2.

 

Network Update

  1. Download the AVPTP202_73.zip file to the server where AviPLAN Turn Pro 2 has been installed.
  2. Unzip the AVPTP202_73.zip
  3. Login on to the server with an account that affords administrator permissions.
  4. Run the Setup.exe file.
  5. Select Set up a Network License option and click on Start.
  6. Follow the remaining onscreen prompts to complete the installation process.
  7. Browse to AviPLAN Turn Pro 2 Workstation folder, right click on the SetupWorkstation.exe file, select Properties, and verify that the Modified Date is January 19, 2018.
  8. Save the ZIP file to an archive location on the network or burn the file to a CDROM/USB drive to be used in the event that you need to re-install or perform a new install of AviPLAN Turn Pro 2.0.2.
  9. Proceed to the Workstation Update.

 

Workstation Update

  1. Login to a workstation with an account that affords administrator permissions.
  2. Browse to the AviPLAN Turn Pro 2 shared folder on the network server.
  3. Browse to the Workstation folder and run the file SetupWorkstation.exe.
  4. You will be presented with a screen to confirm the existing installation location.
  5. Follow the remaining onscreen prompts to complete the installation process.
  6. Load a session of AviPLAN Turn Pro in Autodesk® AutoCAD®, Bentley® MicroStation® or Bricsys® BricsCAD®.
  7. Click About AviPLAN Turn Pro from the toolbar.
  8. Select the Licensing Info button.
  9. Verify that the installed version is now AviPLAN Turn Pro 2.0.2.73.
  10. Repeat steps 1 – 9 on each workstation where AviPLAN Turn Pro 2.0.2 is to be installed.

Note: Optionally, you can update workstations to AviPLAN Turn Pro 2.0.2 using the MSI installer which is generated during the server installation. This option is described in the Readme.txt which is part of the AVPTP202_73.zip file.

 

Should you need any further assistance, please contact our Technical Support team (web form: www.transoftsolutions.com/supportrequest or email: supportaviation@transoftsolutions.com).