AutoTURN VERSION 10.2.3 UPGRADE AVAILABLE FOR MAP SUBSCRIBERS


This software upgrade is for AutoTURN MAP (Maintenance Assurance Program) subscribers with an AutoTURN version 9.0, 9.1 , 10, 10.1 or 10.2 install ONLY. Please ensure that you have an installed version of AutoTURN 9.0 or higher before you attempt to download the upgrade.
This is a 664 MB file. Download time using 8 Mbit/s download speed is around 10 minutes

What's New in AutoTURN 10.2.3:

  • Added compatibility with Autodesk® AutoCAD® 2020
  • Added compatibility with Autodesk®  Civil 3D® 2020
  • Added compatibility with Bricsys® BricsCAD® V19
  • Added compatibility with ZWSOFT® ZWCAD® 2019
  • New Vehicle Libraries
  • New License Activation System
  • Bug fixes

Download AutoTURN 10.2.3

AutoTURN 10.2.3 Platform Compatibility:

  • Autodesk® AutoCAD® 2010 – 2020 (except AutoCAD LT)
  • Autodesk® AutoCAD® Civil 3D® 2010 – 2020 alignments
  • Bentley® MicroStation® V8i, CONNECT®
  • Bentley® PowerDraft® V8i, PowerCivil® V8i
  • Bentley® GEOPAK® V8i, Power InRoads® V8i
  • Bentley® AECOsim Building Designer V8i, CONNECT
  • Bentley® OpenRoads Designer CONNECT
  • Bricsys® BricsCAD® V16 - V19 (Pro and Platinum versions)
  • ZWSOFT® ZWCAD® 2017 - 2019
System Requirements:
  • Full support for 32 and 64-bit operating systems
  • Workstation: Windows® 7, Windows® 8/8.1, Windows® 10
  • Network: Windows® Server 2008, 2012, 2016

Installation Instructions

Standalone Upgrade
  1. Download the AT1023_70_English.zip file to the workstation where AutoTURN has been installed.
  2. Unzip the AT1023_70_English.zip file.
  3. Login to the workstation with an account that allows administrator permissions.
  4. Run the Setup.exe file.
  5. Select Set up a Standalone License option and click on Install.
  6. Follow the remaining onscreen prompts to complete the installation process.
  7. Load a session of AutoTURN in Autodesk® AutoCAD®, Bentley® MicroStation®, Bricsys® BricsCAD® or ZWSOFT® ZWCAD®.
  8. Click Program Settings from the AutoTURN toolbar or menu.
  9. Click the Licensing category.
  10. Verify that the installed version is now AutoTURN 10.2.3 and the Maintenance Contract expiration date is still valid (has not passed).
  11. Save the ZIP file to an archive location on the network or burn the file to a CDROM/USB drive to be used in the event that you need to re-install or perform a new install of AutoTURN 10.2.

Network Upgrade
  1. Download the AT1023_70_English.zip file to the server where AutoTURN has been installed.
  2. Unzip the AT1023_70_English.zip file.
  3. Login on to the server with an account that affords administrator permissions.
  4. Run the Setup.exe file.
  5. Select Set up a Network License option and click on Install.
  6. Follow the remaining onscreen prompts to complete the installation process.
  7. Save the ZIP file to an archive location on the network or burn the file to a CDROM/USB drive to be used in the event that you need to re-install or perform a new install of AutoTURN 10.2.3.
  8. Run the License Server Administration Utility shortcut from the Start Menu or browse to the Transoft Solutions\License Server folder and run LicenseServerAdminTool.exe.
  9. Enter the server name or IP address and communications port (default is 27099) for the License Server system.
  10. Select AutoTURN 10.2.3 as the product that you wish to administrate.
  11. Review the licensing information to verify the installed version of AutoTURN 10.2.3 has been authorized and the Maintenance Contract expiration date is still valid (has not passed).
  12. Proceed to the Workstation Upgrade.

Workstation Upgrade
  1. Login to a workstation with an account that affords administrator permissions.
  2. Browse to the AutoTURN 10 shared folder on the network server.
  3. Browse to the Workstation folder and run the file SetupWorkstation.exe.
  4. You will be presented with a screen to confirm the existing installation location.
  5. Follow the remaining onscreen prompts to complete the installation process.
  6. Repeat steps 1 - 5 on each workstation where AutoTURN 10.2.3 is to be installed.
Note: Optionally, you can upgrade workstations to AutoTURN 10.2.3 using the MSI installer which is generated during the server installation. This option is described in the Readme.txt which is part of the AT1023_70_English.zip file. Should you need any further assistance, please contact our Technical Support team (web form: www.transoftsolutions.com/technical-support or email:support@transoftsolutions.com).