AutoTURN 10.2.3 Software Update

This software update is for AutoTURN 10.2 users ONLY. Please ensure that you have an installed version of AutoTURN 10.2 before you attempt to download the update.

This update includes feature additions and fixes for the following:

  • Added compatibility for Autodesk® AutoCAD® 2020
  • Added compatibility with and Autodesk® Civil 3D® 2020
  • Added compatibility with Bricsys® BricsCAD® V19
  • Added compatibility with ZWSOFT® ZWCAD® 2019
  • New Standard Vehicle Libraries – 2D and 3D Realistic Models
    • Australia: PBS ATC06-76 (AU). Guideline name: Smart management of Australian Road Transport
  • New License Activation System
  • Bug fixes

Do I need to update?
We recommend that you apply this update if you have AutoTURN 10.2 currently installed. You can check your AutoTURN version number using the following instructions:

  1. Start AutoTURN on a workstation
  2. Click on Program Settings
  3. Select the Licensing category

To begin the update process, please fill out the following form to download the update and follow the installation instructions below.

Download

AutoTURN 10.2.3 Software Update

We’re sorry – there seems to have been an error with this page. We apologize for any inconvenience this may have caused you. Please try again later.

You can also contact our Support team for further assistance:

Installation Instructions

Standalone Update

  1. Download the AT1023_70_English.zip file to the workstation where AutoTURN has been installed.
  2. Unzip the AT1023_70_English.zip file.
  3. Login to the workstation with an account that allows administrator permissions.
  4. Run the Setup.exe file.
  5. Select the Set up a Standalone License option and click on Install.
  6. Follow the onscreen prompts to complete the installation process.
  7. Load a session of AutoTURN in Autodesk® AutoCAD®, Bentley® MicroStation®, Bricsys® BricsCAD® or ZWSOFT® ZWCAD®.
  8. Click Program Settings from the AutoTURN toolbar.
  9. Select the Licensing category.
  10. Verify that the installed version is now AutoTURN 10.2.2

Network Update

  1. Download the AT1023_70_English.zip file to the server where AutoTURN has been installed.
  2. Unzip the AT1023_70_English.zip file.
  3. Login to the server with an account that allows administrator permissions.
  4. Run the Setup.exe file.
  5. Select the Set up a Network License option and click on Install.
  6. Follow the onscreen prompts to complete the installation process.
  7. Browse to AutoTURN 10 Workstation folder, right click on the SetupWorkstation.exe file, select Properties, and verify that the Modified Date is April 12, 2019.
  8. Proceed to the Workstation Update.

Workstation Update

  1. Login to the workstation with an account that allows administrator permissions.
  2. Browse to the AutoTURN 10 Workstation Installers shared folder on the network server and run the file SetupWorkstation.exe.
  3. You will be presented with a screen to confirm the existing installation location.
  4. Follow the remaining onscreen prompts to complete the installation process.
  5. Load a session of AutoTURN in Autodesk® AutoCAD®, Bentley® MicroStation®, Bricsys® BricsCAD® or ZWSOFT® ZWCAD®.
  6. Click Program Settings from the AutoTURN toolbar.
  7. Select the Licensing category.
  8. Verify that the installed version is now AutoTURN 10.2.3.
  9. Repeat steps 1 – 9 on each workstation where AutoTURN is to be installed.

Note: Optionally, you can update workstations to AutoTURN 10.2.3 using the MSI installer, which is generated during the server installation. This option is described in the Readme.txt, which is part of the AT1023_70_English.zip file. Should you need any further assistance, please contact our Technical Support team (web form:www.transoftsolutions.com/au/technical-support or email:support@transoftsolutions.com).