Aircraft or service vehicle turn analyses can be undertaken with ease with AviPLAN™ Turn. Conveniently switch between drive and turn modes to construct new paths or follow existing drawing geometry, all with the help of the intuitive ‘heads-up’ display. With AviPLAN Turn, the user is always in full control and can generate detailed reports to prove the accuracy of results.
Libraries | AviPLAN Airside Pro |
AviPLAN Airside |
AviPLAN Turn Pro |
AviPLAN Turn |
2D commercial, cargo and military airplanes and helicopters – top view | ![]() |
![]() |
![]() |
![]() |
2D tractors (towbar and towbarless) and support equipment – top view | ![]() |
![]() |
![]() |
![]() |
2D commercial, cargo and military airplanes – front and side views | ![]() |
![]() |
||
2D design airplanes for each FAA, EASA and ICAO group – top view | ![]() |
![]() |
||
2D passenger boarding bridges – top view | ![]() |
![]() |
||
3D-realistic commercial, cargo and military airplanes | ![]() |
![]() |
||
3D-realistic tractors (towbar and towbarless) and support equipment | ![]() |
![]() |
||
3D-realistic passenger boarding bridges | ![]() |
|||
Create custom 2D vehicles and support equipment | ![]() |
![]() |
![]() |
![]() |
Create custom 2D passenger boarding bridges | ![]() |
![]() |
||
Create and store groups of airplanes, e.g. airline fleet mix | ![]() |
![]() |
Path Construction | AviPLAN Airside Pro |
AviPLAN Airside |
AviPLAN Turn Pro |
AviPLAN Turn |
Simulate 2D airplane, helicopter and vehicle maneuvers | ![]() |
![]() |
![]() |
![]() |
Perform simulations with 3D-realistic airplanes and vehicles on X, Y plane | ![]() |
![]() |
||
Generate pushback or tow maneuvers with airplane and compatible tractor | ![]() |
![]() |
![]() |
![]() |
Alternate between arc, oversteer and direct turn types | ![]() |
![]() |
![]() |
![]() |
Follow ground markings (CAD elements) or maneuver manually | ![]() |
![]() |
![]() |
![]() |
Change steering angle dynamically to optimize maneuvers | ![]() |
![]() |
||
Set path start/end by clicking objects in existing simulations | ![]() |
![]() |
Stand Design and Parking | AviPLAN Airside Pro |
AviPLAN Airside |
AviPLAN Turn Pro |
AviPLAN Turn |
Park static 2D airplanes, helicopters or vehicles | ![]() |
![]() |
![]() |
![]() |
Place static 3D-realistic airplanes or vehicles | ![]() |
![]() |
||
Design 2D contact and non-contact (remote) stands | ![]() |
![]() |
||
Plan 3D-realistic contact and non-contact (remote) stands on X, Y plane | ![]() |
|||
Specify bridge characteristics, e.g. limits, cabin rotation, slope, etc. | ![]() |
![]() |
||
Define manually and/or reposition stop lines with range indicator assistant | ![]() |
![]() |
||
Automate stop line creation, airplane positioning and parking optimization | ![]() |
|||
Add multiple bridges and lead-in lines (MARS) | ![]() |
|||
Define apron services, e.g. fuel pits, 400 Hz and conditioned air | ![]() |
Airside Design | AviPLAN Airside Pro |
AviPLAN Airside |
AviPLAN Turn Pro |
AviPLAN Turn |
FAA, EASA or ICAO airplane classification and clearance regulations | ![]() |
![]() |
![]() |
![]() |
Airplane filtering/sorting options to compare/select critical airplane(s) | ![]() |
![]() |
![]() |
![]() |
Design nose-gear or cockpit centerline markings | ![]() |
![]() |
||
Create taxiway fillet, shoulder and critical engine lines | ![]() |
![]() |
||
Receive clearance violation alerts between stands | ![]() |
Display Elements | AviPLAN Airside Pro |
AviPLAN Airside |
AviPLAN Turn Pro |
AviPLAN Turn |
Colors, line types, layers/levels and other properties | ![]() |
![]() |
![]() |
![]() |
Paths e.g. nose-gear and main-gear, engines, wing tips, pilot’s eye | ![]() |
![]() |
![]() |
![]() |
Jet blast velocity contours and impact areas for various thrust levels | ![]() |
![]() |
![]() |
![]() |
ICAO/FAA/EASA/User-defined nose-gear, main-gear or wing tip clearances | ![]() |
![]() |
![]() |
![]() |
Service connections and vehicles, clearance box(es), engine-intake area(s) | ![]() |
![]() |
![]() |
![]() |
Airplane cloud and merged clearance box (all airplanes on a lead-in line) | ![]() |
![]() |
||
Fuel pit(s) and other installations, with safety and/or operational radius | ![]() |
Animation and Visualization | AviPLAN Airside Pro |
AviPLAN Airside |
AviPLAN Turn Pro |
AviPLAN Turn |
Animate 2D airplane, helicopter and vehicle movements in CAD drawing | ![]() |
![]() |
![]() |
![]() |
Animate 3D-realistic airplane and vehicle movements in CAD drawing | ![]() |
![]() |
||
Create 2D and 3D-realistic movie presentations | ![]() |
![]() |
||
Pan between fixed camera positions and follow moving objects | ![]() |
![]() |
||
Record presentations to AVI for playback using any compatible player | ![]() |
![]() |
Reporting | AviPLAN Airside Pro |
AviPLAN Airside |
AviPLAN Turn Pro |
AviPLAN Turn |
Create Microsoft Word® (.odt) and/or CAD text path reports | ![]() |
![]() |
![]() |
![]() |
Create Microsoft Word® (.odt), Excel® (.csv) and/or CAD text stand reports | ![]() |
![]() |