GuideSIGN PlUS VERSION 7.1 UPGRADE AVAILABLE FOR MAP SUBSCRIBERS


This software upgrade is for GuideSIGN Plus  MAP (Maintenance Assurance Program) subscribers with a GuideSIGN Plus version 7.0 install ONLY. Please ensure that you have an installed version of GuideSIGN Plus 7.0 before you attempt to download the upgrade.
This is a 338 MB file. Download time using 8 Mbit/s download speed is around 10 minutes

What's New in GuideSIGN Plus 7.1:

  • New panel styles, templates and exit panels in accordance to MUTCD 2009 with 2012 supplement
  • New sign libraries in accordance to MUTCD 2009 with 2012 supplement guidelines:
    • US Federal MUTCD 2009   |   California 2014
    • Colorado Supplement 2006   |    Florida 2018
    • Illinois Supplement 2014   |   New York State 2011
    • North Carolina 2009   |   Virginia Supplement 2011
    • New Mexico 2005
  • Pavement marking toolset:
    • Accurately draw markings and stripes on your road design.
      • Traffic lines, such as center or lane lines
      • Island Hatches
      • Yield Lines
      • Circular and Square Reflective Markers
      • Advanced Warning Symbols
      • Crosswalks
      • Based on state specific standards
    • Place MUTCD symbols, numbers and letters
    • Produce road markings reports for cost estimates
  • New licensing activation system
  • Various bug fixes and improvements

Download GuideSIGN Plus 7.1

GuideSIGN Plus 7.1 Platform Compatibility:

  • Autodesk® AutoCAD® 2013 – 2020 (except AutoCAD LT)
  • Autodesk® Civil 3D® 2013 – 2020 alignments
  • Bentley® MicroStation® V8i (SS3 and up), CONNECT®
  • Bentley® PowerDraft® V8i, PowerCivil® V8i
  • Bentley® GEOPAK® V8i, Power InRoads® V8i
  • Bentley® AECOsim Building Designer V8i, CONNECT
  • Bentley® OpenBuildings Designer CONNECT
  • Bentley® OpenRoads Designer CONNECT
  • Bricsys® BricsCAD® (Pro and Platinum versions) V18 - V19
System Requirements:
  • Full support for 64-bit operating systems
  • Workstation: Windows® 7, Windows® 8/8.1, Windows® 10
  • Network: Windows® Server 2008, 2012, 2016, 2019

Installation Instructions

Standalone Upgrade
  1. Download the GS71_120_GuideSIGNPlus_English.zip file to the workstation where GuideSIGN Plus has been installed.
  2. Unzip the GS71_120_GuideSIGNPlus_English.zip file.
  3. Login to the workstation with an account that allows administrator permissions.
  4. Run the Setup.exe file.
  5. Select Set up a Standalone License option and click on Install.
  6. Follow the remaining onscreen prompts to complete the installation process.
  7. Load a session of GuideSIGN Plus in Autodesk® AutoCAD®, Bentley® MicroStation® or Bricsys® BricsCAD®.
  8. Click Program Settings from the GuideSIGN Plus toolbar or menu.
  9. Click the Licensing category.
  10. Verify that the installed version is now GuideSIGN Plus 7.1 and the Maintenance Contract expiration date is still valid (has not passed).
  11. Save the ZIP file to an archive location on the network or burn the file to a CDROM/USB drive to be used in the event that you need to re-install or perform a new install of GuideSIGN Plus 7.1.

Network Upgrade
  1. Download the GS71_120_GuideSIGNPlus_English.zip file to the server where GuideSIGN Plus has been installed.
  2. Unzip the GS71_120_GuideSIGNPlus_English.zip file.
  3. Login on to the server with an account that affords administrator permissions.
  4. Run the Setup.exe file.
  5. Select Set up a Network License option and click on Install.
  6. Follow the remaining onscreen prompts to complete the installation process.
  7. Save the ZIP file to an archive location on the network or burn the file to a CDROM/USB drive to be used in the event that you need to re-install or perform a new install of GuideSIGN Plus 7.1.
  8. Run the License Server Administration Utility shortcut from the Start Menu or browse to the Transoft Solutions\License Server folder and run LicenseServerAdminTool.exe.
  9. Enter the server name or IP address and communications port (default is 27099) for the License Server system.
  10. Select GuideSIGN Plus 7.1 as the product that you wish to administrate.
  11. Review the licensing information to verify the installed version of GuideSIGN Plus 7.1 has been authorized and the Maintenance Contract expiration date is still valid (has not passed).
  12. Proceed to the Workstation Upgrade.

Workstation Upgrade
  1. Login to a workstation with an account that affords administrator permissions.
  2. Browse to the GuideSIGN Plus 7 shared folder on the network server.
  3. Browse to the Workstation folder and run the file SetupWorkstation.exe.
  4. You will be presented with a screen to confirm the existing installation location.
  5. Follow the remaining onscreen prompts to complete the installation process.
  6. Repeat steps 1 - 5 on each workstation where GuideSIGN Plus 7.1 is to be installed.
Note: Optionally, you can upgrade workstations to GuideSIGN Plus 7.1 using the MSI installer which is generated during the server installation. This option is described in the Readme.txt which is part of the GS71_120_GuideSIGNPlus_English.zip file. Should you need any further assistance, please contact our Technical Support team (web form: www.transoftsolutions.com/technical-support or email:support@transoftsolutions.com).