AutoTURN 10.0.2 Software Update

This software update is for AutoTURN 10.0 users ONLY. Please ensure that you have an installed version of AutoTURN 10.0 before you attempt to download the update.

This update includes feature additions and fixes for the following:

  • Added compatibility with Bricsys® BricsCAD® V17 and ZWSOFT® ZWCAD® 2017
  • Support for Windows® Server 2016
  • Includes new license server version

 

Do I need to update?
We recommend that you apply this update if you have AutoTURN 10.0 currently installed. You can check your AutoTURN version number using the following instructions:

  1. Start AutoTURN on a workstation
  2. Click on Program Settings
  3. Select the Licensing category

To begin the update process, please fill out the following form to download the update and follow the installation instructions below.

Download

AutoTURN 10.0.2 Software Update

We’re sorry – there seems to have been an error with this page. We apologize for any inconvenience this may have caused you. Please try again later.

You can also contact our Support team for further assistance:

Installation Instructions

Standalone Update

  1. Download the AT1002_36_English.zip file to the workstation where AutoTURN has been installed.
  2. Unzip the AT1002_36_English.zip file.
  3. Login to the workstation with an account that allows administrator permissions.
  4. Run the Setup.exe file.
  5. Select the Set up a Standalone License option and click on Install.
  6. When prompted, enter your current license number and the following CD Key:
    • 9AWB-A4Y5-FN2U-N3UU-TBIJ and click on Next.
  7. Follow the onscreen prompts to complete the installation process.
  8. Load a session of AutoTURN 10 in Autodesk® AutoCAD® , Bentley® MircoStation®, Bricsys® BricsCAD® or ZWSOFT® ZWCAD® .
  9. Click Program Settings from the AutoTURN toolbar.
  10. Select the Licensing category.
  11. Verify that the installed version is now AutoTURN 10.0.2.

Network Update

  1. Download the AT1002_36_English.zip file to the server where AutoTURN has been installed.
  2. Unzip the AT1002_36_English.zip file.
  3. Login to the server with an account that allows administrator permissions.
  4. Run the Setup.exe file.
  5. Select the Set up a Network License option and click on Install.
  6. When prompted, enter your current license number and the following CD Key:
    • 9A82-6T5Z-J2U6-YMZK-HTH6 and click on Next.
  7. Follow the onscreen prompts to complete the installation process.
  8. Browse to AutoTURN 10Workstation folder, right click on the SetupWorkstation.exe file, select Properties, and verify that the Modified Date is March 7, 2017.
  9. Proceed to the Workstation Update.

Workstation Update

  1. Login to the workstation with an account that allows administrator permissions.
  2. Browse to the AutoTURN 10 shared folder on the network server.
  3. Browse to the Workstation folder and run the file SetupWorkstation.exe.
  4. You will be presented with a screen to confirm the existing installation location.
  5. Follow the remaining onscreen prompts to complete the installation process.
  6. Load a session of AutoTURN in Autodesk® AutoCAD®, Bentley® MicroStation®, Bricsys® BricsCAD® or ZWSOFT® ZWCAD® .
  7. Click Program Settings from the AutoTURN toolbar.
  8. Select the Licensing category.
  9. Verify that the installed version is now AutoTURN 10.0.2.
  10. Repeat steps 1 – 9 on each workstation where AutoTURN is to be installed.

Note: Optionally, you can update workstations to AutoTURN 10.0.2 using the MSI installer, which is generated during the server installation. This option is described in the Readme.txt, which is part of the AT1002_36_English.zip file. Should you need any further assistance, please contact our Technical Support team (web form:www.transoftsolutions.com/technical-support or email:support@transoftsolutions.com).