AviPLAN Turn 2.0.2 Software Update

This software update is for AviPLAN Turn 2 users ONLY. Please ensure that you have an installed version of AviPLAN Turn 2 before you attempt to download the update.

This update includes the following:

Do I need to update?
We strongly recommend that you apply this update if you currently have AviPLAN Turn 2.0.0 or 2.0.1 installed. You can check your AviPLAN Turn version number using the following instructions:

  1. Start AviPLAN Turn on a workstation
  2. Click on About AviPLAN Turn

To begin the update process, please fill out the following form to download the update and follow the installation instructions below.

Download

AviPLAN Turn 2.0.2 Software Update

AviPLAN Turn 2.0.2 Software Update

You can download the update at the following link:

Installation Instructions

Standalone Update

  1. Download the AVPT202_73.zip file to the workstation where AviPLAN Turn 2 has been installed.
  2. Unzip the AVPT202_73.zip
  3. Login to the workstation with an account that allows administrator permissions.
  4. Run the Setup.exe file.
  5. Select Set up a Standalone License option and click on Install.
  6. Follow the remaining onscreen prompts to complete the installation process.
  7. Load a session of AviPLAN Turn in AutoCAD®, MicroStation® or BricsCAD®.
  8. Click About AviPLAN Turn from the menu, ribbon or toolbar.
  9. Click the License Info button.
  10. Verify that the installed version is now AviPLAN Turn 2.0.2.73.
  11. Save the ZIP file to an archive location on the network or burn the file to a CDROM/USB drive to be used in the event that you need to re-install or perform a new install of AviPLAN Turn 2.0.2.

 

Network Update

  1. Download the AVPT202_73.zip file to the server where AviPLAN Turn 2 has been installed.
  2. Unzip the AVPT202_73.zip
  3. Login on to the server with an account that affords administrator permissions.
  4. Run the Setup.exe file.
  5. Select Set up a Network License option and click on Start.
  6. Follow the remaining onscreen prompts to complete the installation process.
  7. Browse to AviPLAN Turn 2 Workstation folder, right click on the SetupWorkstation.exe file, select Properties, and verify that the Modified Date is January 19, 2018.
  8. Save the ZIP file to an archive location on the network or burn the file to a CDROM/USB drive to be used in the event that you need to re-install or perform a new install of AviPLAN Turn 2.0.2.
  9. Proceed to the Workstation Update.

 

Workstation Update

  1. Login to a workstation with an account that affords administrator permissions.
  2. Browse to the AviPLAN Turn 2 shared folder on the network server.
  3. Browse to the Workstation folder and run the file SetupWorkstation.exe.
  4. You will be presented with a screen to confirm the existing installation location.
  5. Follow the remaining onscreen prompts to complete the installation process.
  6. Load a session of AviPLAN Turn in Autodesk® AutoCAD®, Bentley® MicroStation® or Bricsys® BricsCAD®.
  7. Click About AviPLAN Turn from the toolbar.
  8. Select the Licensing Info button.
  9. Verify that the installed version is now AviPLAN Turn 2.0.2.
  10. Repeat steps 1 – 9 on each workstation where AviPLAN Turn 2.0.2 is to be installed.

Note: Optionally, you can update workstations to AviPLAN Turn 2.0.2 using the MSI installer which is generated during the server installation. This option is described in the Readme.txt which is part of the AVPT202_73.zip file.

 

Should you need any further assistance, please contact our Technical Support team (web form: www.transoftsolutions.com/supportrequest or email: supportaviation@transoftsolutions.com).