TORUS ROUNDABOUTS 4.0.1 SOFTWARE UPDATE

THIS SOFTWARE UPDATE IS FOR TORUS 4.0 USERS ONLY:
Please ensure that you have an installed version of TORUS 4.0 before you attempt to download the update.

* Please read the instructions listed below before proceeding *

** You will also need to input the software CD Key number when installing the update. You may use the same CD Key provided with the TORUS Roundabouts 4.0 CD or from the email download.

This Update Includes fixes for the following issues:

  • Roundabout legs do not automatically update after editing Civil 3D alignments that are used as leg references.
  • Incorrect offsets are applied to Fastest Paths when using High Speed Entries and/or Fixed Lane Widths.

Do I need to update?
If you have TORUS Roundabouts 4.0 currently installed, we strongly recommend that you apply this update. You can check your TORUS version number using the following instructions:

  • Standalone License
    To check the TORUS Version Number, please start TORUS on a workstation, click on Program Settings and then select Licensing category.
  • Network License
    To check the TORUS Version Number, please start TORUS on a workstation, click on Program Settings and then select Licensing category.

How do I update?

  • Click the Download the Update File link below and save the file to a local hard drive.
  • Log in as Administrator. Follow the Installation Instructions below.
Download

TORUS ROUNDABOUTS 4.0.1 SOFTWARE UPDATE

Installation Instructions

Standalone Update

  1. Download the TR401_English.zip file to the workstation where TORUS 4.0 has been installed.
  2. Unzip the TR401_English.zip file.
  3. Login to the workstation with an account that allows administrator permissions.
  4. Run the Setup.exe file.
  5. Select Set up a Standalone License option and click on Start
  6. Follow the onscreen prompts to complete the installation process.
  7. Load a session of TORUS 4.0.1 in Autodesk® AutoCAD® or Bentley® MicroStation®.
  8. Click Program Settings from the TORUS toolbar.
  9. Select the Licensing category.
  10. Verify that the installed version is now TORUS 4.0.1.

Network Update

  1. Download the TR401_English.zip file to the server where TORUS 4.0 has been installed.
  2. Unzip the TR401_English.zip file.
  3. Login on to the server with an account that affords administrator permissions.
  4. Run the Setup.exe file.
  5. Select Set up a Network License option and click on Start.
  6. Follow the onscreen prompts to complete the installation process.
  7. Browse to TORUS 4Workstation folder, right click on the SetupWorkstation.exe file, select Properties, and verify that the Modified Date is September 4, 2012.
  8. Proceed to the Workstation Update

Workstation Update

  1. Login to a workstation with an account that affords administrator permissions.
  2. Browse to the TORUS 4 shared folder on the network server.
  3. Browse to the Workstation folder and run the file SetupWorkstation.exe.
  4. You will be presented with a screen to confirm the existing installation location.
  5. Follow the remaining onscreen prompts to complete the installation process.
  6. Load a session of TORUS 4.0.1 in Autodesk® AutoCAD® or Bentley® MicroStation®.
  7. Click Program Settings from the TORUS toolbar.
  8. Select the Licensing category.
  9. Verify that the installed version is now TORUS 4.0.1.
  10. Repeat steps 1 – 9 on each workstation where TORUS 4.0.1 is to be installed.

Note: Optionally, you can upgrade workstations to TORUS 4.0.1 using MSI installer which is generated during the server installation. This option is described in Readme.txt file which is part of TR401_English.zip.

Should you need any further assistance, please contact our Technical Support team (web form: www.transoftsolutions.com/technical-support
or email: support@transoftsolutions.com).