AUTOTURN LITE 10.2.3 SOFTWARE UPDATE

This software update is for AutoTURN Lite users ONLY. Please ensure that you have an installed version of AutoTURN Lite 9.0 before you attempt to download the update.

This update includes feature additions and fixes for the following:

  • Added compatibility for AutoCAD® and AutoCAD® Civil 3D® 2020
  • Added compatibility for Bricsys® BricsCAD® 19 and ZWSOFT® ZWCAD® 2019
  • New vehicle libraries
  • New License Activation System
  • Bug fixes

Do I need to update?
We recommend that you apply this update if you have AutoTURN Lite 10.2 currently installed. You can check your AutoTURN Lite version number using the following instructions:

  1. Start AutoTURN Lite on a workstation
  2. Click on Program Settings
  3. Select the Licensing category
Download

AUTOTURN LITE 10.2.3 SOFTWARE UPDATE

We’re sorry – there seems to have been an error with this page. We apologize for any inconvenience this may have caused you. Please try again later.

You can also contact our Support team for further assistance:

INSTALLATION INSTRUCTIONS

Standalone Update

  1. Download the ATLite1023_70_British.zip file to the workstation where AutoTURN Lite has been installed.
  2. Unzip the ATLite1023_70_British.zip file.
  3. Login to the workstation with an account that allows administrator permissions.
  4. Run the Setup.exe file.
  5. Select the Set up a Standalone License option and click on Install.
  6. Follow the onscreen prompts to complete the installation process.
  7. Load a session of AutoTURN Lite in Autodesk® AutoCAD®, Bricsys® BricsCAD® or ZWSOFT® ZWCAD®.
  8. Click Program Settings from the AutoTURN Lite toolbar.
  9. Select the Licensing category.
  10. Verify that the installed version is now AutoTURN Lite 10.2.3.

Network Update

  1. Download the ATLite1023_70_British.zip file to the server where AutoTURN Lite has been installed.
  2. Unzip the ATLite1023_70_British.zip file.
  3. Login to the server with an account that allows administrator permissions.
  4. Run the Setup.exe file.
  5. Select the Set up a Network License option and click on Install.
  6. Follow the onscreen prompts to complete the installation process.
  7. Browse to AutoTURN Lite 10 Workstation folder, right click on the SetupWorkstation.exe file, select Properties, and verify that the Modified Date is April 19, 2019.
  8. Proceed to the Workstation Update.

Workstation Update

  1. Login to the workstation with an account that allows administrator permissions.
  2. Browse to the AutoTURN Lite 10 Workstation Installers shared folder on the network server and run the file SetupWorkstation.exe.
  3. You will be presented with a screen to confirm the existing installation location.
  4. Follow the remaining onscreen prompts to complete the installation process.
  5. Load a session of AutoTURN Lite in Autodesk® AutoCAD®, Bricsys® BricsCAD® or ZWSOFT® ZWCAD®.
  6. Click Program Settings from the AutoTURN Lite toolbar.
  7. Select the Licensing category.
  8. Verify that the installed version is now AutoTURN Lite 10.2.3.
  9. Repeat steps 1 – 9 on each workstation where AutoTURN Lite is to be installed.

Note: Optionally, you can update workstations to AutoTURN Lite 10.2.3 using the MSI installer, which is generated during the server installation. This option is described in the Readme.txt, which is part of the ATLite1023_70_British.zip. Should you need any further assistance, please contact our Technical Support team (web form:www.transoftsolutions.com/technical-support or email:support@transoftsolutions.com).